Starting from:
$14,203
Specifications
- Manufacturer: John Deere
- Model: X590 54-in. Deck
- Year: 2025
- Type: Lawn tractor
- Engine power: 25.5 hp
- Oil change: No-tools oil drain with replaceable filter
- Engine manufacturer/model: FS730 EFI
- Transaxle type: K72 hydrostatic integrated with transaxle
- Transaxle control: Twin Touch™ pedals
- Rear tires: 24x12-12 HDAP
- Lift system type: Hydraulic
- Cutting width: Accel Deep™ mower deck, 54 in.
- U.S. warranty: 4 year/500 hour bumper-to-bumper** (**Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
- Power: 25.5 hp
- Displacement: 44.3 cu in.
- Manufacturer/model: FS730 EFI
- Type: Electronic fuel injection (EFI), overhead valve, full-pressure lube, oil filter
- Cylinders: V-twin, cast-iron liners
- Governor: Constant-speed electronic throttle control
- Choke/speed control: No choke required
- Cooling method: Air
- Air cleaner: Dry, replaceable with foam precleaner
- Oil change: No-tools oil drain with replaceable filter
- Type: Gasoline
- Fuel delivery: Open-loop electronic fuel injection (EFI)
- Fuel gauge: Gauge on dash
- Fuel tank location: Rear
- Fuel fill opening: On left fender, 3 in.
- Fuel tank capacity: 4.4 U.S. gal.
- Battery: 12 V
- Charging system: Flywheel alternator, regulated, 24 amp
- Engine starter: Solenoid shift
- Hour meter: Yes
- Headlights: Two standard, incandescent, 27 W
- Taillights or reflector: Reflectors
- Backup lights: No
- Rear work lights: No
- 12-V outlet: Yes
- Type: K72 hydrostatic integrated with transaxle
- Control: Twin Touch™ pedals
- Cruise control: Yes, button on dash
- Oil cooler: Fins and fan on transaxle
- Oil filter: Yes, replaceable
- Differential lock: Standard
- Forward speed: 0-7.2 mph
- Reverse speed: 0-5.2 mph
- Brakes: Internal wet disc
- Frame: Welded heavy-duty
- Primer/paint: E-coat/powder
- Weight bracket: Standard front and rear - each holds up to four Quik-Tatch weights, 42 lb
- Receiver hitch: No
- Front axle: Cast iron front axle, front wheel ball bearings
- Spindle bushings: Metal, replaceable
- Front tires: 16x6.5-8 turf
- Rear tires: 24x12-12 HDAP
- Hood material: Fully enclosed, molded-in color material reduces sound, will not rust or dent
- Fender deck material: Stamped steel
- Floor mats: Sure-grip rubber
- Storage: Yes, covered toolbox
- Service interval decal: Yes
- Fender handles/grips: Handles
- Cup holder: Yes
- Equipment mounting: Yes, heavy duty
- Maximum towing capacity: 800 lb
- Type: Power, hydraulic
- Four-wheel steer: Not available on this model
- Steering wheel: 14 in.
- Tilt steering wheel: Standard, five position
- Turning radius: 22 in.
- Uncut circle radius: 24 in.
- Type: Cut-and-sewn high-back
- Seat back height: 21 in.
- Armrests: Optional
- Fore-aft adjustment: While seated, ball bearing slide rail, 15-position, 6.6 in.
- Seat suspension: Six-position parallel arm
- Type: Hydraulic
- Hydraulic outlets: No
- Mower cut height: 13 positions, 1-4 in.
- Cut height increments: 0.25 in.
- Preset cut height: Yes
- Type: Side discharge
- Cutting width: Accel Deep™ mower deck, 54 in.
- Construction: Forged steel deck shell
- Mower deck material: 10 gauge
- Mower wash port: Yes
- Mower drive system: Electric power take-off (PTO) clutch, in-line belt
- Mower wheels: Four
- Mower wheel adjustment: Seven-position, spring-loaded pin
- Mower level adjustment: Exact Adjust ports and deck-leveling gauge
- Type: Roll under tractor
- Front draft arms: Attached with spring pins at two points
- Rear draft arms: Quick-pull pins
- Mower wheels rotate: Yes, 90 degrees for easy mower removal
- Drive system: Dual belt
- Meets ANSI standard: Yes
- Meets OPEI standard: Yes
- Backup protection: Reverse Implement Option (RIO)
- Safety video: Yes
- Notes: Heavy-duty garden tractor transaxle
- Warranty: 4 year/500 hour bumper-to-bumper** (**Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
- Mowers: 54A (standard)
- Rear bagger: 7, 14, 19 bu
- Powered material collection: Power Flow™ blower
- Mulching system: Yes, MulchControl™
- Front thatcher: 38, 46, 54 in.
- Front blade: 48 in.
- Snow blower: Two-stage, 47 in.
- Rotary tiller: Mechanical, 30 in.
- Sleeve hitch: Yes, implements include box scraper, rear blade, plow, disk, and cultivator
- Plow, moldboard: Yes
- Box scraper: Yes
- Cultivator: Yes
- Rear blade: Yes
- Sprayer: Tow-behind, 15, 25 U.S. gal.
- Spreader: 125, 175 lb
- Front bumper: Standard front bumper/weight bracket
- Brush guard: Yes
- Weather protection: Weather enclosure
- Sun canopy: Yes
- Bucket holder: Yes, double bucket
- Grass striping: Lawn striping kit
- Tractor shovel: 40 in.
- Tow-behind tools: 19
- Height: 52.7 in.
- Overall length: 77.4 in.
- Wheelbase: 51.2 in.
- Width with mower: 68.4 in.
- Width with mower (deflector raised for storage): 58.3 in.
- Width without mower: 40.7 in.
- Weight: Mower, no fuel: 796 lb
- Manufacturing location: Horicon, Wisconsin, USA
- Date collected: 3-Oct-22
