Starting from:
$9,111
2025 John Deere X390 48-in. Deck

Specifications

  • Manufacturer: John Deere
  • Model: X390 48-in. Deck
  • Year: 2025
  • Type: Lawn tractor
  • Engine power: 23 hp
  • Oil change: No-tools oil drain with replaceable filter
  • Engine manufacturer/model: FR691V
  • Transaxle type: K58 hydrostatic integrated with transaxle
  • Transaxle control: Twin Touch™ pedals
  • Rear tires: 22x11-10
  • Lift system type: Hydraulic
  • Cutting width: Accel Deep™ mower deck, 48 in.
  • U.S. warranty: 4 year/300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
  • Power: 23 hp
  • Displacement: 44.3 cu in.
  • Manufacturer/model: FR691V
  • Type: Overhead valve, full-pressure lube, oil filter
  • Cylinders: V-twin, cast-iron liners
  • Governor: Mechanical
  • Choke/speed control: Separate levers, automatic choke return
  • Cooling method: Air
  • Air cleaner: Dry, replaceable
  • Oil change: No-tools oil drain with replaceable filter
  • Type: Gasoline
  • Fuel delivery: Pulse pump, carburetor
  • Fuel gauge: Gauge on dash
  • Fuel tank location: Rear
  • Fuel fill opening: On left fender, 3 in.
  • Fuel tank capacity: 3.3 U.S. gal.
  • Battery: 12 V
  • Charging system: Flywheel alternator, regulated, 12 amp
  • Engine starter: Bendix
  • Hour meter: Yes
  • Headlights: Two standard, incandescent, 27 W
  • Taillights or reflector: No
  • Backup lights: No
  • Rear work lights: No
  • 12-V outlet: Optional
  • Type: K58 hydrostatic integrated with transaxle
  • Control: Twin Touch™ pedals
  • Cruise control: Yes, button on dash
  • Oil cooler: Fins and fan on transaxle
  • Oil filter: Internal, not replaceable
  • Differential lock: No
  • Forward speed: 0-6.2 mph
  • Reverse speed: 0-3.5 mph
  • Brakes: Internal wet disc
  • Frame: Welded heavy-duty
  • Primer/paint: E-coat/powder
  • Weight bracket: Standard rear, optional front
  • Receiver hitch: No
  • Front axle: Cast iron front axle, front wheel ball bearings
  • Spindle bushings: Metal, replaceable
  • Front tires: 15x6.5-8
  • Rear tires: 22x11-10
  • Hood material: Fully enclosed, molded-in color material reduces sound, will not rust or dent
  • Fender deck material: Stamped steel
  • Floor mats: Sure-grip rubber
  • Storage: Yes, under seat and covered toolbox
  • Service interval decal: Yes
  • Fender handles/grips: No
  • Cup holder: Yes
  • Equipment mounting: Yes, heavy duty
  • Maximum towing capacity: 600 lb
  • Type: Power, hydraulic
  • Four-wheel steer: Not available on this model
  • Steering wheel: Large, 14 in.
  • Tilt steering wheel: Standard, five position
  • Turning radius: 22 in.
  • Uncut circle radius: 24 in.
  • Type: Cut-and-sewn high-back
  • Seat back height: 18 in.
  • Armrests: Optional
  • Fore-aft adjustment: While seated, ball bearing slide rail, 15-position, 6.6 in.
  • Seat suspension: Tilt, two coil springs, three-position no-tools adjustment for operator weight
  • Type: Hydraulic
  • Hydraulic outlets: No
  • Mower cut height: 13 positions, 1-4 in.
  • Cut height increments: 0.25 in.
  • Preset cut height: Yes
  • Type: Side discharge
  • Cutting width: Accel Deep™ mower deck, 48 in.
  • Construction: Forged steel deck shell
  • Mower deck material: 10 gauge
  • Mower wash port: Yes
  • Mower drive system: Electric power take-off (PTO) clutch, in-line belt
  • Mower wheels: Four
  • Mower wheel adjustment: Seven-position, spring-loaded pin
  • Mower level adjustment: Exact Adjust ports and onboard deck-leveling gauge
  • Type: Roll under tractor
  • Front draft arms: Attached with spring pins at two points
  • Rear draft arms: Quick-pull pins
  • Mower wheels rotate: Yes, 90 degrees for easy mower removal
  • Drive system: Dual belt
  • Meets ANSI standard: Yes
  • Meets OPEI standard: Yes
  • Backup protection: Reverse Implement Option (RIO)
  • Safety video: Yes
  • Notes: Hydraulic power lift for superior convenience and ease of use
  • Warranty: 4 year/300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
  • Mowers: 48A (standard)
  • Rear bagger: 7, 19 bu
  • Powered material collection: Power Flow™ blower
  • Mulching system: Yes, MulchControl™
  • Front thatcher: 38, 46, 54 in.
  • Front blade: 44 in.
  • Snow blower: Two-stage, 44 in.
  • Sprayer: Tow-behind, 15 U.S. gal.
  • Spreader: Tow-behind, 125 lb
  • Front bumper: Styled bumper option
  • Brush guard: Yes
  • Weather protection: Weather enclosure
  • Sun canopy: Yes
  • Bucket holder: Yes, double bucket
  • Grass striping: Lawn striping kit
  • Tractor shovel: 40 in.
  • Tow-behind tools: 16
  • Height: 49 in.
  • Overall length: 72.3 in.
  • Wheelbase: 49.4 in.
  • Width with mower: 62.6 in.
  • Width with mower (deflector raised for storage): 52.6 in.
  • Width without mower: 39.4 in.
  • Weight: Mower, no fuel: 678 lb
  • Manufacturing location: Horicon, Wisconsin, USA
  • Date collected: 3-Oct-22