Starting from:
$22,135
Specifications
- Manufacturer: John Deere
- Model: X739
- Year: 2025
- Type: Signature series lawn tractor
- Engine power: 25.5 hp
- Engine manufacturer/model: FD750D EFI
- Transaxle type: K90 hydrostatic integrated with transaxle
- Transaxle control: Twin Touch™ pedals
- Rear tires: 26x12-12 HDAP
- Lift system type: Two-function hydraulic
- Cutting width: Accel Deep™ mower deck, 48 in.
- U.S. warranty: 4 year/700 hour bumper-to-bumper** (**Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
- Power: 25.5 hp
- Displacement: 45.5 cu in.
- Manufacturer/model: FD750D EFI
- Type: Electronic fuel injection (EFI), overhead valve, full-pressure lube, oil filter
- Cylinders: V-twin, cast-iron liners
- Governor: Mechanical
- Choke/speed control: No choke required
- Cooling method: Liquid
- Air cleaner: Dry, replaceable with foam precleaner
- Oil change: No tools
- Type: Gasoline
- Fuel delivery: Electronic fuel injection
- Fuel gauge: Gauge on dash
- Fuel tank location: Rear
- Fuel fill opening: On left fender, 3 in.
- Fuel tank capacity: 5.2 U.S. gal.
- Battery: 12 V
- Charging system: Flywheel alternator, regulated, 20 amp
- Engine starter: Solenoid shift
- Hour meter: Yes
- Headlights: Two standard, halogen, 37 W
- Taillights or reflector: Taillights
- Backup lights: Yes
- Rear work lights: Yes
- 12-V outlet: Yes
- Type: K90 hydrostatic integrated with transaxle
- Control: Twin Touch™ pedals
- Cruise control: Yes
- Oil cooler: Yes
- Oil filter: Replaceable suction side 10 micron
- Differential lock: Standard
- Forward speed: 0-8.5 mph
- Reverse speed: 0-6 mph
- Brakes: Internal wet disc
- Frame: Welded heavy-duty
- Primer/paint: E-coat/powder
- Weight bracket: Standard front - holds up to four Quik-Tatch weights, 42 lb
- Receiver hitch: Yes, front
- Front axle: JDM BA8 nodular iron casting
- Front tires: 18x8.5-10 HDAP
- Rear tires: 26x12-12 HDAP
- Hood material: Noryl GTX902, painted
- Fender deck material: Stamped steel
- Floor mats: Sure-grip rubber
- Storage: Covered toolbox
- Service interval decal: Yes
- Fender handles/grips: Handles
- Cup holder: Yes
- Equipment mounting: Optional category 1 3-point hitch
- Maximum towing capacity: 1,200 lb
- Type: Hydraulic power
- Four-wheel steer: Yes
- Steering wheel: 14 in.
- Tilt steering wheel: Standard, six position
- Turning radius: 21 in.
- Uncut circle radius: 54 HC, 10 in.
- Type: Two-piece adjustable seat with brand embroidery
- Seat back height: 21 in.
- Armrests: Optional
- Fore-aft adjustment: While seated, slide rail, 14-position, 7 in.
- Seat suspension: Six-position parallel arm
- Type: Two-function hydraulic
- Hydraulic outlets: Four, standard
- Mower cut height: 1-5.25 in.
- Cut height increments: 0.25 in.
- Preset cut height: Yes
- Type: Side discharge
- Cutting width: Accel Deep™ mower deck, 48 in.
- Construction: Forged steel deck shell
- Mower deck material: 48A, 10 gauge
- Mower wash port: Yes
- Mower drive system: Hydraulic clutch, shaft
- Mower wheels: 48A, four and center front roller
- Mower wheel adjustment: Spring-loaded pin
- Mower level adjustment: Exact Adjust ports and onboard deck-leveling gauge
- Type: Roll under tractor (48A)
- Front draft arms: Overcenter
- Rear draft arms: V-align
- Mower wheels rotate: Yes, 90 degrees for easy mower removal (48A), N/A (54 HC, 60 HC)
- Drive system: Shaft or AutoConnect
- Meets ANSI standard: Yes
- Meets OPEI standard: Yes
- Backup protection: Reverse Implement Option (RIO)
- Safety video: Yes
- Notes: Styled alloy wheels are standard equipment
- Warranty: 4 year/700 hour bumper-to-bumper** (**Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
- Mowers: 48A, 54 HC, 60 HC
- Rear bagger: 7, 14, 19 bu
- Powered material collection: Power Flow, 7, 14, 19 bu
- Mulching system: Yes, MulchControl™
- Front thatcher: 38, 46, 54 in.
- Front blade: 54 in.
- Snow blower: Two-stage, 47, 54 in.
- Rotary broom: 52, 60 in.
- Rotary tiller: 42, 48 in.
- 3-point hitch: Category 1
- Rear power take-off (PTO): 540 rpm
- Plow, moldboard: Adjustable, 8-14 in.
- Box scraper: 48 in.
- Cultivator: Adjustable, 30-46 in.
- Rear blade: 60 in.
- Disk harrow: Adjustable, 42-52 in.
- Landscape rake: 60 in.
- Sprayer: Tow-behind, 15, 25, 45 U.S. gal.
- Spreader: Tow-behind, 125, 175 lb
- Front bumper: Standard bumper/weight bracket
- Brush guard: Yes
- Weather protection: Hard-side cab, weather enclosure
- Rear receiver hitch: 1.25 x 1.25 in.
- Bucket holder: Yes, double bucket
- Grass striping: Grass groomer kit, 48-in. (122-cm) mower only
- Tractor shovel: 54 in.
- Front loader: Not available
- Tow-behind tools: 21
- Height: 54.5 in.
- Overall length: 75 in.
- Wheelbase: 55.7 in.
- Width with mower: 48A: 62.5 in.
- Width with mower (deflector raised for storage): 48A: 53.6 in.
- Width without mower: 49 in.
- Weight: No fuel or mower, 1,034 lb
- Manufacturing location: Horicon, Wisconsin, USA
- Date collected: 1-Aug-23
