Specifications
- Manufacturer: John Deere
- Model: 3046R
- Year: 2025
- Type: Compact tractor
- Engine power (gross): SAE J1995 rated power: 33.3 kW
- Power take-off (PTO) power: 25.2 kW
- Steering hydraulics: 23.5 L/min
- Implement hydraulics: 34.3 L/min
- Hitch type: Category 1
- Lift capacity, 24-in. behind link arms: 995 kg
- Standard transmission; forward/reverse: eHydro transmission
- Cruise control: Standard
- Approximate shipping weight (open-station; cab): Open operator station (OOS): 1391 kg
- Wheelbase: 1727 mm
- Manufacturer: Yanmar®
- Engine model: 3TNV86CHT-MJTV
- Engine power (gross): SAE J1995 rated power: 33.3 kW
- Power take-off (PTO) power: 25.2 kW
- Rated engine speed: 2600 rpm
- Type: Diesel
- Injection pump type: High pressure common rail direct injection
- Aspiration: Turbocharged and intercooled
- Emissions compliance: Final Tier 4
- Cylinders/displacement: Three cylinders: 1.57 L
- Number of cylinders: Three
- Cylinder liners: Cast-in-block
- Bore and stroke: 86 x 90 mm
- Compression ratio: 19.1:1
- Lubrication: Pressurized
- Cooling system: Liquid
- Air cleaner: Dual element
- Engine torque at rated speed: 112.3 Nm
- Fuel tank capacity: OOS: 37.4 L
- Battery size: 500 CCA
- Alternator (12-V): 75 amp
- Starter size: 1.4 kW
- Type: High pressure common rail direct injection
- Standard transmission; forward/reverse: eHydro transmission
- Transmission gear ranges: Three-range, infinitely variable
- Final drive: Spur gear
- Brakes: Wet disk
- Steering: Hydrostatic power steering
- Axle capacity: Front
- Cruise control: Standard
- Type: Open center
- Pump rated output: Steering
- Pump type: Single gear
- Maximum operating pressure: 172 bar
- Draft control sensing: Position control
- Remote control valves available: Up to six rear remotes
- Type: Category 1
- Lift capacity, 24-in. behind link arms: 995 kg
- Standard: Independent rear: 540 rpm
- Optional: Mid: 2100 rpm
- Control: Lever and switch
- Clutch: Wet disk
- Brake (for mid and rear PTO): Wet disk
- Crankcase with filter: 5.7 L
- Transmission and hydraulic system: 26.5 L
- Type: Spur gear
- Rollover protective structure: Type
- Platform - flat/straddle: One-piece semi flat
- Compliance: Complies with OSHA, SAE, and CSA standards for rollover protection
- Visibility: 360 degree (angle)
- Doors: Two
- Noise rating: 80 dBA
- Seat equipment: Scissor-link
- Wheelbase: 1727 mm
- Front axle clearance: Minimum: 171 mm
- Turning radius with brakes: 2.7 m
- Turning radius without brakes: 2.8 m
- Approximate shipping weight (open-station; cab): OOS: 1391 kg
- Front: R1 Bar: 7-14
- Rear: R1 Bar: 11.2-24
- Front tread range: 1117 mm
- Rear tread spacing: 1031 mm
